- 1 Zircon StudSensor e50 Electronic Stud Finder
- 2 CH Hanson 03040 Magnetic Stud Finder
- 3 ProSensor 710 Franklin Sensors ProSensor 710 Precision Stud Finders Yellow
- 4 Bosch GMS120 Digital Multi-Scanner
- 5 Buyers Guide
- 6 Magnetic Stud Finder
- 7 Electronic Stud Finder
- 8 Wood Stud Finder
- 9 Summary
In case you are looking forward to working with a contractor to renovate your house or you are going to hang a picture or LCD, stud finder is the tool that you must always have. You might consider it as an old school tool. However, the latest technology has equipped this old tool with some amazing features that will amaze you. It will provide you with more information and is easy to calibrate. Often times you might consider that when you have a stud finder application then why you need to buy the tool. The reason behind it is that smartphones are not developed to calibrate properly and they will not provide you with accurate information.
So forget about your goals and have a look at these top stud finders. They will be in your budget and will surely meet all your requirements.
Zircon StudSensor e50 Electronic Stud Finder
It is a single sensor dielectric constant, electronic stud finder. Just slide the stud finder across the wall and it will make a sound when you have landed on one. It will also indicate the presence of cavities on the wall. Thus, you will know exactly where to drill in the wall.
Product features – Some of the features that you will come across are:
- It will locate the edges of the wood and the metal studs
- Manufactured to provide 1 ½ inch location of stud on the deep scan mode and 3 to 4 inch deep on the stud scan mode
- There are wire warning detections that will indicate the presence of the live wires up to 2 inches deep
- The LCD is easy to read
- Equipped with the patented spotlite pointing system for target marking
Despite being a dielectric constant, it will provide you with more information and thus can be regarded as a smart stud finder. It is inexpensive.
You will have to constantly press the power button and it might sometimes miss the AC lines. When you release the power button, it might take a few seconds to recalibrate.
CH Hanson 03040 Magnetic Stud Finder
This magnetic stud finder will be perfect for you if you want to locate the studs in the drywalls. The magnets utilized in the device are strong enough that they will even indicate the presence of studs in the plaster walls where they are mostly deep inside.
- CH Hanson is manufactured with the following features:
- The small and compact size makes it easy to fit even in your pocket
- With the powerful magnets, you can utilize the device hands-free
- To make the target marking easy it is equipped with a 2-way level
- Batteries are not required
- For easy grabbing and a comfortable detection it has a soft grip
It will pinpoint the studs accurately and it is very simple and easy to utilize. It will not require maintenance and it will durable because of the tough and high-quality manufacturing. You will not even require marking the stud with a pencil.
A few drawbacks that you will have to deal with are that it will provide you with a limited use only. As the walls get deeper, it will become ineffective in detection.
ProSensor 710 Franklin Sensors ProSensor 710 Precision Stud Finders Yellow
It is one of the top quality sensors that will provide you with the accurate detection even for the deep walls. Franklin with its 13 LED indication lights and easy to slide manufacturing will make the stud detection process easy and quick for you.
- Following are the features that you will enjoy with Franklin:
- Manufactured with the advanced Multi-Sense technology. It will detect the presence of studs in several locations.
- It will make visualizing the location of studs easy because of the bright LED indicators
- It will indicate the width of the objects as well
- The position of many studs will be indicated simultaneously
- The deep scanning is always active up to 1.5 inches
The best advantage of the product it that it will save your time because of the multi-detection features. The sensor will scan the wall deeply and provide you with accurate results regardless of how deep the stud may be. The ergonomic design makes it easy to handle and slide.
The metallic foil might affect the performance of the device. It will only indicate the presence and will not be able to detect the type of material.
Bosch GMS120 Digital Multi-Scanner
The professional stud finder will help you to find both the metallic and the wooden studs. Apart from the accurate location, it will also warn you when you accidently pass by a stud. It will work perfectly on the smooth and uneven surfaces.
- Manufactured with the multi-mode detection and thus can detect wood, metal studs, and live wires.
- Wide range of detection and performance because of three sensor technology
- It can detect studs up to 3 to 4 inches deep even in concrete
- It will provide you with automatic calibration with precise accuracy.
- You can select between the three selection modes
- The graphical LED display is illuminated
- Equipped with the audible detection signal
It will cause the accurate identification of the live wires and thus will reduce the chances of any accidents. It will make the detection process easy for the users. The device is very simple to use and will let you know if there is anything behind the wall.
The display is hard to read when the backlight is turned off.
When buying the home equipment a stud finder might not be at the top of your list. However, when you are looking for one you must consider the following facts before making an investment.
The feature that you should first consider is the type of stud finder that you require. There are two types of a magnetic and an electronic. Both have their special advantages and disadvantages. A magnetic stud finder will detect only the metallic studs. Whereas the electronic finder will identify the items inside the walls based on the electromagnetic changes in the composition of the wall.
The price of the product is most important to consider because it should not upset your budget. The cost of the stud finder depends on the brand, features, complexity, and condition. Therefore, it is essential that before making a decision you check different products and compare their features and prices. Make sure to pay for the features that you are getting. If you do not require a high-tech stud finder, you can save up by buying a normal one.
You might do not want to have a stud finder for life. Therefore, it will be a better option to buy a used one. However, you have to make sure that the product you are going to purchase is in good condition. It should work properly. Otherwise, it will be a waste of your money.
In the market, you will come across several manufacturers of the stud finder. They will provide you with different features and thus the cost will be affected as well. So depending on your personal preference buy the product that satisfies your requirements the most.
The purpose for which you are buying the stud finder is also important. If you require it for professional use then you must buy a top quality product that will provide you with maximum features. On the other hand, if it is only for the home you then a simple magnetic stud finder will do the job and there is no need to spend much.
Magnetic Stud Finder
The magnetic stud finder uses the strong magnets to find the metallic studs in the walls. The attraction of the magnet will grow stronger as it will go near the metal. It will detect the studs whether they are at the center or edges of the walls. The magnetic stud finders are two types:
Stationary magnetic stud finder
It consists of a simple stationary magnet that will help you to detect the studs. You will have to move the magnet around the wall in order to detect the magnets. In this detection procedure, you will have to feel the attraction because in most of the cases there might be no technology in the device to indicate the presence of the metal. Therefore, the effectiveness of the detector is low.
Moving magnetic stud finder
They are mostly neodymium and they are free to move to find the magnet hidden inside the walls. All you have to do is suspend the detector in the right position, it will automatically move towards the metal studs, and you will get the exact location. It is not dependent on the operator and thus will provide with accurate results and marked targets.
Electronic Stud Finder
Electronic stud detector depends on sensors that identify changes in the dielectric steady of the wall. The dielectric consistent changes when the sensor is on a stud. The reading shows the nearness of a stud in the divider. Interior capacitor stud finders can likewise accompany different components that find metal and live AC voltage. They are available in three types:
Edge stud finder
They are the internal capacitor stud finder. It will detect the edges of the studs. You will have to first move it on the empty wall so it can calibrate and then it can easily identify the exact locations of the studs.
Centre stud finder
Center stud detector identifies the focal point of the stud by utilizing two sensors that enroll isolate readings of the dielectric constant of the walls. When the two readings coordinate, the finder demonstrates that it is fixated on a stud. The few readings are utilized to decide the objective focus. Center stud finder just should be moved from one direction.
Instant stud finder
Instant stud detector is a new technology. Instant finder has different sensor plates and should be moved over the wall to recognize a stud, conquering the impacts of the uneven surface. They utilize a calculation to dissect the readings from the numerous sensor plates for a quicker, more precise sign. Instant finder senses numerous directions of walls at the same time including the focal point of a stud, edges of the stud, and areas without studs. An instant stud finder will show changed widths of studs and the area of various studs in the meantime.
Wood Stud Finder
As wood is not a metal so there is not special stud finder that has been developed to detect the presence of the wooden studs. However, the electronic stud finders have been made with a special feature. This is the reason that you will come across a wood mode in many of the top quality student detectors.
When you will change the detection mode of the stud finder towards the wood it will simply detect the wooden studs identifying the changes in the electromagnetic composition of the walls. The different in the composition will be detected when you move the stud finder on the even surface of the wall. The user will be identified by an alarming sound or with the help of the LED indicators. Therefore, if you are in search for a wood stud finder than electronic detectors will be your best choice.
So if you are about to renovate your house or need some DIY hanging tools make sure that you have the stud finder in your toolbox. It will prevent you from several accidents by identifying the presence of the live AC wires. Soo keeping the above information in mind make sure that you select the right finder according to your budget and your requirements. The stud finders will help you solve a lot of your problems and they will be useful in hanging several objects in the right place.